T4405 Packaging material applied process code

Code valueNameDescriptionUsed in Sweden
CHEMICALLY_HARDENEDChemically HardenedThe material has been treated to have additional resistance to deformation or change.
COEXTRUDEDCoextrudedCoextruded films are melted together without adhesive.X
COMPRESSEDCompressedThe material has been subjected to compressive stress which results in reduction of volume as compared to an uncompressed but otherwise identical state.
INJECTION_MOULDEDInjection MouldedThe material was manufactured by injection moulding, which consists of feeding the material into a heated barrel, mixed, and forced into a mold cavity where it cools and hardens to the configuration of the cavity.
INSULATEDInsulatedThe material has been designed or processed to reduce heat transfer.
LAMINATED_WITH_ADHESIVELaminated with adhesiveLaminated films are glued together with adhesive.X
MOISTURE_RESISTANTMoisture ResistantThe material property that resists uptake or passage of water. The resistance of a packaging material to deterioration or change when in contact with water. To be water resistant is not to be waterproof.
MOULDEDMouldedThe material was manufactured by moulding, which consists of filling a mold with the material on liquid form and allowing it to harden so it takes the shape of the mold.
VACUUM_FORMEDVacuum FormedA process through which a material is heated to a forming temperature, stretched onto or into a single-surface mould, and held against the mould by applying a vacuum between the mould surface and the sheet.
WATER_REPELLENTWater RepellentThe material has been treated or processed so it can resist the ingress of water under specified conditions.
Tillbaka till toppen