T4354 Packaging material element code

Code value Name Description Used in Sweden
BASE Base to stand up vertically A general term applied to the support or pedestal of an object. X
BUNG_SEAL Bung seal A bung is an apparatus used to seal a container, such as a bottle, barrel or tube. A bung is partially inserted inside the container to act as a seal. X
CAGE Cage/Muzzle A cage that fits over the cork of a bottle of champagne, sparkling wine or beer to prevent the cork from emerging under the pressure of the carbonated contents. X
CAP Cap A cap that seals a bottle or other form of packaging. X
CARRIER Carrier A device of various types attached to or hang from trolleys to support the load. X
CONSUMPTION_UTENSIL Consumption utensil An item which allows the user to extract and/or consume the content of a container or product (straws, spoons, ice cream stick). X
CORK Cork A small cylinder that is pushed into the packaging to close it. X
COUPLER Coupler A device for connecting parts of barrel, cask etc. X
DIVIDER_PROTECTOR Divider/Protector A component in packaging to serve as protecting the product and/or also the packaging shape. X
EDGE_PROTECTION Edge protection A right-angle piece placed over the outermost perimeter edges of a container to distribute pressure and prevent collapse or cutting from banding, strapping, or handling. X
FLAP Flap A piece of material, hinged or attached only on one side, that covers an opening or hangs down from the packaging. X
HANDLE Handle A grip attached to an object for using or moving the object, usually with the hands. X
LABEL Label A label is a piece of paper, polymer, cloth, metal, or other material affixed to a container or article (or printed directly upon it), which usually carries information about the article to which it has been attached. X
LID Lid In packaging, the top or bottom of a container, usually the part that closes the opening; may also be known as cap, over, or top. X
LINER Liner An internal chamber within a container which separates the content of the container from the walls. Inner liners provide additional isolation and protection to the content of a container. Sometimes coatings of certain materials may be applied as an alternative to inner liners. X
LSST Lightning stopper swing-top (LSST) The LSST is a pin with a spring and a toggle lever principle, usually made of porcelain or plastic, with a sealing ring, mainly for closing bottles. Opening and closing can be done by hand as often as desired and does not require any aid such as a bottle opener. Also known as a flip-top. X
MAIN_PACKAGE_TYPE Main package type The code to designate the material that pertains to the value defined in packageTypeCode. X
OTHER Other The value needed is not listed or is not defined within this list’s individual code values and definitions. Please send a work request into GS1 or your solution provider requesting the code you are searching for. X
PEG Peg A fastener which allows a product to be hanged. X
SLEEVE Sleeve A tubular form, open at both ends, that is slipped over an item or package. X
SPIGOT Spigot A small peg, plug or tapl, especially for insertion into the vent of a cask. X
TAB Tab A flexible cover which can be easily removed in order to open a container. X
TAG Tag A hanging card made of any material which is used to identify or provide additional information of a product. X
TAP Tap A device that controls the flow of liquid/gas. X
Tillbaka till toppen